radiocomando ricevitore 1 ch Wireless Visualizza ingrandito

radiocomando ricevitore 1 ch Wireless

RF1CH

Nuovo

modulo Radiocomando, composto da ricevitore ad un canale, per qualsiasi progetto dove occorre comandare qualcosa da lontano e senza cavi.

Maggiori dettagli

1 Articolo

Attenzione: Ultimi articoli in magazzino!

12,50 €

Dettagli

modulo  Radiocomando, composto da ricevitore ad un canale, per qualsiasi progetto dove occorre comandare qualcosa da lontano e senza cavi.

Technical indicators:

1.operating voltage: DC 12V ; 

2.working frequency:433.92MHz;
3:Maximum load: 1000 watts;
4:PCB Size:41×20×15mm;
5: Momentary Mode ,Latch Mode , Toggle Mode can be adjustable by slodering back side.
6. Pls connect the receiver modules properly before power supply ;
8: Momentary Mode ,Latch Mode , Toggle Mode can be adjustable by jumper .
9. Pls connect the receiver modules properly before power supply ;
10: 1 chanels;
11: Learning function (can works with EV1527 SC2262 PT2262 PT2264 PT2260 remote , can store 10 pcs different code remote );

Advantage : 
1: Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 Learning remotes to re-learn;

Output:

A.singnal Inter-locking (Latch)----connect 1  and 2 ; 

B.singnal Self-locking (Toggle) ---- connect 2 and 3 ; 

C.singnal Non-locking (Momentary ) ---- All disconnect ;

Inter-locking (Latch): 4-way relay each other to switch, when relay A  is working and locked  ,  relay B C D corresponding to switch off; when B is working and locked , corresponding relay A C D swith off ; Only 1 relay is on among 4 relays A B C D;
Non-locking type (Momentary): Press A and hold it , then A is on.Same as Relay B C D ;

Self-lock type (Toggle): 4 chanels opens and closes independently, 4 chanels can work together ,they don’t affect each other . press A button, A relay of work and locked, press again then  disconnected; Same as B C D .

Learning method and steps

1.  Keep pressing learnig key on receiver board , release the button when LED is off , enter the learning state ;

2.  Press any key on remote control within 5 seconds , LED flash 3 times and then turn on , then it have success in learning .

Clear the deposit information

Keep Pressing Learning Key , LED turns off , Wait 10 Seconds , LED turn on , that deposited information has been successfully cleared ;

Recensioni

Non ci sono commenti dei clienti al momento.

Scrivi una recensione

radiocomando ricevitore 1 ch Wireless

radiocomando ricevitore 1 ch Wireless

modulo Radiocomando, composto da ricevitore ad un canale, per qualsiasi progetto dove occorre comandare qualcosa da lontano e senza cavi.

Scrivi una recensione

Accessori